WIFI — The right way to Get a Rock-Stable Internet Connection

The most common problem is in establishing a ‘good’ connection between the remote pc and the wireless router. Many people do not realize that just because you are receiving a signal from your wireless router, (AP) you still might not be able to log onto the Internet. Here is the problem.

A weak or noisy internet connection is normally caused by lost or scrambled data packets. These damaged packets are continuously being ‘re-despatched’ between the router and the receiving computer. This will sluggish down your connection considerably and will even keep you from getting on the Internet at all.

There are a number of ways you can improve these weak WIFI signals. The easiest is to move the wireless router. If doable, attempt to locate your router close to the middle of the building. I’ve picked up WIFI signals from as far away as 1,000 feet when there were no obstacles blocking the transmission. However, I’ve additionally had a hard time just getting the signal to go from one finish of a house to the other. This will be especially true if the router is positioned on a unique floor than the receiving computer. The more partitions and floors the signal passes through, the weaker it gets.

If you cannot locate the router close to the center of the building, there are several different things you may do. First, strive moving the receiving laptop to a unique location. Even turning it in a distinct direction might help. Laptops usually have the WIFI antenna built into the monitor so just turning the laptop slightly could be all you will have to do to improve the reception.

Normally, I’ve found that USB Internet adapters work much better than laptop inner receivers. The reason is…these external adapters come with a 3 to 5 foot cord allowing the adapter to be positioned high in the air and away from obstacles that might be blocking the WIFI signal. Sadly, this means dragging around an additional system which will not be what I really want to do. Luckily, in most cases your internal WIFI system will get the job completed just fine.

If you have to reach out to an AP that’s hundreds and even thousands of feet away, you may want to research adding a high-achieve antenna and a USB Internet adapter. This is actually old technology. Ham radio buffs have been building hi-gain antennas for decades allowing them to obtain signals from around the world. There are numerous antenna designs available that practically anyone can build. For a few dollars, you may boost your range considerably.

The world record for a WIFI connection using ‘only’ a hi-achieve antenna is 238 miles! You are probably not planning on challenging any records, however it’s pretty widespread to see folks connecting to wireless routers up to a mile or more away, just through the use of DIY antennas.

If you cherished this posting and you would like to get additional data concerning WIshareFI Captive Portal kindly take a look at our web site.