WIFI — The best way to Get a Rock-Strong Internet Connection

The commonest problem is in establishing a ‘good’ connection between the remote computer and the wireless router. Many people do not realize that just because you’re receiving a signal out of your wireless router, (AP) you still will not be able to log onto the Internet. Here’s the problem.

A weak or noisy internet connection is normally caused by lost or scrambled data packets. These damaged packets are always being ‘re-sent’ between the router and the receiving computer. This will gradual down your connection considerably and will even keep you from getting on the Internet at all.

There are several ways you’ll be able to improve these weak WIFI signals. The best is to move the wireless router. If possible, attempt to find your router close to the middle of the building. I’ve picked up WIFI signals from as far away as 1,000 ft when there have been no obstacles blocking the transmission. However, I’ve also had a hard time just getting the signal to go from one finish of a house to the other. This may be especially true if the router is situated on a unique floor than the receiving computer. The more walls and floors the signal passes through, the weaker it gets.

If you cannot find the router near the center of the building, there are a number of other things you may do. First, try moving the receiving computer to a special location. Even turning it in a distinct direction could help. Laptops often have the WIFI antenna constructed into the monitor so just turning the laptop slightly is likely to be all you may must do to improve the reception.

On the whole, I’ve discovered that USB Internet adapters work a lot better than laptop inside receivers. The reason is…these exterior adapters come with a 3 to 5 foot cord permitting the adapter to be positioned high within the air and away from obstacles that is perhaps blocking the WIFI signal. Unfortunately, this means dragging around an additional device which shouldn’t be what I really wish to do. Luckily, in most cases your internal WIFI system will get the job completed just fine.

If you need to reach out to an AP that is hundreds or even thousands of ft away, you may need to analyze adding a high-gain antenna and a USB Internet adapter. This is actually old technology. Ham radio buffs have been building hi-achieve antennas for decades permitting them to receive signals from across the world. There are various antenna designs available that practically anyone can build. For a couple of dollars, you possibly can increase your range considerably.

The world document for a WIFI connection using ‘only’ a hi-achieve antenna is 238 miles! You’re probably not planning on challenging any records, but it’s fairly common to see individuals connecting to wireless routers up to a mile or more away, just through the use of DIY antennas.

If you treasured this article and you simply would like to get more info concerning WIshareFI Captive Portal please visit our own web site.